久久无码高清,噜噜成人一区二区,美女视频一区播放,日韩三级一区二区入口

撥號18861759551

你的位置:首頁 > 技術文章 > 如何測量您的成像系統中的景深

技術文章

如何測量您的成像系統中的景深

技術文章

Gauging Depth of Field in Your Imaging System

Over the years, we have answered countless questions regarding lens performance. Of those questions, none have been more difficult to define than requests for depth of field. The reason for this difficulty has more to do with the vagueness of the question than with the inability to provide a measured or calculated value. Consider for a moment what depth of field ls us. It is the distance by which an object may be shifted before an unacceptable blur is produced. For depth of field to be properly stated, it should contain not only the displacement of an image, but also a specific resolution. The depth of field specification is further complicated by a type of keystoning aberration that often occurs. This result can dramatically affect linear measurements and therefore render depth of field unusable. In this article we will take a closer look at depth of field calculations and compare them to physical measurements using the DOF 1-40 depth of field gauge. The gauge, as we will see later, offers a unique look at what depth of field really means and how we as system designers may wish to quantify this parameter. A simple geometric approximation for depth of field is shown in Figure 1.0. The linear blur (required resolution) Bp, Bm and Bf can be expressed in terms of angular blur by the following equation.

Figure 1

 

Using similar triangles, a relationship can now be made between angular blur and the focus point,

where λ is the aperture of the lens. Solving for δplus and δmin,

The derivation above is very specific to the intended resolution. However, many theoretical derivations of depth of field often assume the lens resolution to be nearly diffraction limited. The most popular of these derivations are based on microscope applications. A typical example for the total depth of field (dplus + dmin) is shown below.

Where λ is the wavelength and NA equals the numerical aperture of the lens.

In order to study depth of field we have put together a simple macro system consisting of a 25mm fixed focal length lens, 8mm spacer and Sony XC-75 monochrome CCD video camera. The system was chosen not for its performance but rather for its common real world implementation. Measurements were performed using the DOF 1-40 target. The target allows us to measure depth of field at either 1, 10, 20 or 40 lp/mm over a maximum depth of 50mm. The flat field resolution of this system is approximay 15 lp/mm at 0.3X primary magnification. For purposes of our experiment, a blur spot resolution of 0.1 mm or 10 lp/mm was chosen. Depth of field measurements were taken at three aperture settings corresponding to f/2, f/4, and f/8. An important point should be noted about aperture settings. The f-number shown on most fixed focal length lenses is calculated with the object at infinity. As a result, we have adjusted our NA and therefore our aperture values for a 95mm working distance.

The values below highlight a number of points to consider. In general our calculated and measured delta d are fairly close. However, the displacement of the image due to defocus aberrations was not predicted by our calculations. This type of displacement error could certainly be problematic if the system contained an auto iris. If we compare our measured results to the delta-theory, we notice a significant variation. As we mentioned earlier, this variation is due to a false assumption concerning system resolution.

Another property that should be noted in our DOF 1-40 observations is the non-uniform magnification seen through the depth of field range. This is a very common problem in most lenses and, as we stated earlier, can yield significant errors if measurements are made throughout the full depth of field range. Edmund Optics provides several ecentric options to correct for this type of error.

In the end, it is the total performance of an optical system that counts. As a full service supplier and manufacturer of optics, illumination, CCD cameras, monitors, mounting, and electronic imaging related products, Edmund Optics has the knowledge and resources to look at your application as a total system. In fact, innovative tools such as the DOF 1-40 have come about from our own in-house need to quantify system performance. So if you are looking for individual components that can be integrated into your system or starting from scratch, our engineers are ready to help.

聯系我們

地址:江蘇省江陰市人民東路1091號1017室 傳真:0510-68836817 Email:sales@rympo.com
24小時在線客服,為您服務!

版權所有 © 2025 江陰韻翔光電技術有限公司 備案號:蘇ICP備16003332號-1 技術支持:化工儀器網 管理登陸 GoogleSitemap

在線咨詢
QQ客服
QQ:17041053
電話咨詢
0510-68836815
關注微信
99日韩综合精品| 强奸丝袜少妇| 99精品欧美一区二区蜜桃免费| 免费看美女被操网站| 日韩 欧美 一二| 午夜爽爽性刺激一区二区| 丝袜少妇第一二三区| 中文字幕精选一区二区视频| 国产96av精品一区二区| 久久久性生活片| 大香蕉久久精品在线| 日本久视屏| 四季二区不卡视频在线看| 在线一区在线二区在线三区无码专区 | 蜜臀av国产一区| 超碰精品亚洲| 美女裸色国产超黄1级精品| 成人午夜在线无码福利| 人妻大战黑人白浆狂泄| 久久只有这有精品97| 美女让男人桶网站| 电影无码一区二区| 黄色高潮j在线观看| 搜索免费看片日韩大鸡巴操小逼视频| 精品国产精品露脸| 亚洲国产欧美另类在线| 国产视频婷婷五月份| 午夜在线欧美日韩精品| 在线成人视频网站大香蕉| 人妻一区二区三区日韩| 鸡巴猛操骚逼视频| 久久久久久久久国产粉嫩| 国产欧美一区二区三区,在线| 中文无码人妻有码人妻中文字幕 | 日韩熟女后入成人| 久久狠狠爱综合| 大香蕉av在线播放| 超级精品一区| 国产成人AV麻豆色哟哟| 日韩偷拍欧美国产高清| 日b免费高清视频|